200PSI 12V Heavy Duty Air Compressor Kit Air Ride Suspension Compressor for car horns, pneumatic suspension systems 200-300W
SPECIFICATIONS
Brand Name: NoEnName_Null
Certification: None
Fuel: Electric
High-concerned chemical: None
Origin: CHINA
Power (W): Electric
Structure: Surface Pump
It is suitable for car horns, pneumatic suspension systems, pneumatic tools, car tires, motorbike tires and so on.

Specifications
Color: Silver
Material: Iron, Copper
Shape: Rectangular
Process: Electroplated
Power Source: Corded Electric
Style: Modern
Shut Down: Manually
Features: Portable, High-pressure
Applicable Models: Automobile Universal
Power: 200-300W
Air Volume: 50L/13.21gal/min
Suitable Capacity of Gas Storage Cylinder: ≤18.93L/5gal
Noise: 72db
Voltage: 12 V
Max.Amperage: 23Amps
Max.Working Pressure: 200PSI
Max.Duty Cycle 100% @100PSI
Flow Rate @0PSI(13.8 Volts): 1.75 CFM
Gross Weight: 4.9kg/10.8lbs
Net Weight: 4.5kg/9.92lbs
Product Size: 30*10*16.5cm/11.8*3.9*6.5in
Package Size: 32*15*21cm/12.6*5.91*8.27in
Package Included
1*Air Compressor
2*Sealing Raw Material Belts
1*Fuse
1*Gas Pipe
1*Filter Valve
Other Installation Accessories
Notes
1.This air compressor can be powered by the 12V car battery but not the car cigarette lighter plug.
2.Please do not overfill air gun tanks or air cylinders (less than 0.26gal), as this can cause serious injury. Never attempt to set the output pressure/auto shut-off above 30Mpa(300 bar). Please do not disassemble the machine without professional guidance. Otherwise, it may lead to damage to the machine.
3.If the machine can not start, you can check and reset, try to restart the power supply, or open the valve to relieve pressure.
4.If the compressor is overheating, you can check the motor rotation direction, wind blades, or cooling water circulation. And continuous working can not exceed 1 hour.
5.If the pressure can't increase or the inflation time is too long, you can adjust or change the hose/connector, or clean/ change the valve sheet. If the machine is smoking, you should turn it off and restart it after it cools down. If the compressor vibrates strangely, you can try to tighten the screws or change the ground.
6.Please do not touch the compressor or accessories with your hands during or immediately after use, except for the ON/OFF switch.
7.If the unit switches itself off during operation, do not attempt to restart the compressor. Turn the ON/OFF switch of the compressor to the OFF position and allow the compressor to cool down for approx. 30 minutes before continuing to use it.
8.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.







Details
Footpads: It is equipped with four footpads at the bottom, which are abrasion-resistant and non-slip.
12V Power Input Plug: The integrated fast 12V power input plug on the side of this air compressor makes it convenient to pull and plug, as well as not easy to fall off.